地下水回灌（Groundwater recharge）.docVIP

地下水回灌（Groundwater recharge） The main points of this technique can be summarized in the following seven aspects: One is the prevention and control of solid phase blockage and geophysical prospecting. Second, the prevention and control of chemical clogging. Third, the prevention and control technology of gas phase plugging. Four is a heat source well filter design technique. The five is the test calculation technique of single well water and recharge quantity. Six is the rational layout and optimal configuration of well. The above work is done, which Wells are suitable for Wells, which Wells are suitable for recharge well, and the best configuration of the well is out. Seven is construction technology. The heat source of the underground water source heat pump system is drawn from Wells or abandoned mines. Heated groundwater can be discharged into the surface water system, but for larger applications it is usually required to bring groundwater back to the original aquifer through a refilling well. In recent years, the underground water source heat pump system has developed rapidly in our country. However, the application of this groundwater heat pump system is also limited. First, the system requires abundant and stable groundwater resources as a prerequisite. So before decided to adopt the groundwater heat pump system, must do detailed hydrogeology survey, and the first exploration Wells, for underground temperature, groundwater depth, water quality and water yield data. The economy of groundwater heat pump system has a great relationship with the depth of underground aquifer. If the underground water table is low, not only the cost of the well will be increased, but the power consumption of the pump will greatly reduce the efficiency of the system. In addition, although in theory to extract the groundwater recharge to the aquifer, groundwater recharge technology in China but is not yet mature, in many geological conditions and irrigation is much lower than the speed