装饰施工员专业基础部分试题(试题3)（Decoration construction staff professional basic section test (item 3)）.doc

装饰施工员专业基础部分试题(试题3)（Decoration construction staff professional basic section test (item 3)） Decorating the professional basic section of the workers professional section (item 3) 1. Fill in the blanks (2 points for each question, 40 points) 1. In the architectural decoration drawings, the length and spacing of the line segments of the dotted line, single point length drawing line or double point length drawing line are appropriate, and the line length of the dotted line is about. 2. In architectural decoration, Chinese characters should be adopted. 3. In the projection of architectural form, it is the size of the relative position of each basic body in the architectural form. 4. Cut open sections of the body with a cutting plane. 5. When reading a projection map, it is generally adopted. 6. The formation of a building usually goes through, in stages. It is designed by the designers to guide the construction of the construction, which is called the construction plan. 7. The function of building decoration materials mainly manifests in, Four things. 8. Water resistance is the ability of the material to maintain its original function in the state and resist the ability to destroy it. 9. Natural stone material can be divided into two categories according to the apparent density. The building gypsum is called or. 11. The raw materials for the production of Portland cement are mainly of two types. 12. Concrete can be classified according to the characteristics of performance, It is. 13. The ease of mixing the concrete includes the three aspects. 14. Unlike masonry mortar, the main technical requirements of plaster mortar are not strength, but and. 15. The main types of glazed tiles are,, and pattern brick, the word painting glaze tile, etc. The plate glass is divided according to the method of production. 17. The basic assumption of deformation solids is,. The balance of statics is relative to earth or to work. 19. The force acting on the rigid body can be moved parallel t