EDI工作原理（Principle of EDI）.docVIP

EDI工作原理（Principle of EDI） EDI (Elcctrodeionization) is a kind of pure water manufacturing technology which combines ion exchange technology, ion-exchange membrane technology and ion transfer technology. It combines electrodialysis and ion exchange technology skillfully, and uses the high voltage at both ends to move the charged ions in water and cooperate with ion exchange The resin and the selective resin film accelerate the removal of ions so as to achieve the purpose of water purification. In the process of EDI desalting, the ion is under the action of electric field Removed by ion exchange membranes. At the same time, the water molecules form hydrogen ions and hydroxyl ions in the electric field, the ions of ion exchange resin. Continuous regeneration to maintain the optimum condition of the ion exchange resin. The desalting rate of EDI facilities can be as high as over 99%. If we use the reverse osmosis equipment to carry out preliminary desalting of water before EDI, and then pass the EDI desalting, we can produce ultra pure water with high resistivity and over 15M.Cm. The EDI stack consists of units sandwiched between two electrodes. There are two different compartments in each unit: the fresh water chamber to be removed and the concentrated water chamber where the impurity ions are removed. Mixing the sun in the fresh water chamber, The anion exchange resin fills these resins between two membranes: cation exchange membranes that allow only cations to penetrate and anion exchange membranes that allow only anions to permeate. With the continuous regeneration in DC electric room using voltage at both ends of the resin bed, so that the water molecules in the water are decomposed into H + and OH - in water, these ions attracted by the corresponding electrode, through the cation and anion exchange resin to the As the ions move through the exchange membrane into the chamber, H + and OH combine to form water. Is this the H + and oh - transfer and Realization Mechani