界面测试（Interface test）.docVIP

界面测试（Interface test） Design function and interface test cases This paper introduces the design function and interface of the test case in detail, for your reference! First, text box, button and other control tests 1, text box testing How do I test text boxes?: A, enter normal letters or numbers; B, enter the name of the file that already exists; C, enter extra long characters. For example, in the name box, enter characters that exceed the allowed boundary number, assume up to 255 characters, try entering 256 characters, and check if the program is properly processed; D, enter default values, blanks, spaces; E, if you only allow input letters, try to type in numbers; otherwise try to type in letters; F uses the copy, paste, and other operations to force input data that is not allowed by the program; G and enter a special character set, such as NUL and \n; H, enter characters or text that exceed the length of the text box to check whether the input is displayed properly; I, enter data that does not conform to the format, check whether the program is properly checked, such as the program requirements, enter the date of yy/mm/dd format, and the actual input yyyy/mm/dd, the program should give an error prompt. Test methods used in the test process: 1, enter illegal data; 2, enter the default value; 3 、 enter a special character set; 4. Enter data that buffers the buffer; 5. Enter the same filename; 2, command button control test Test method: The A and click buttons respond correctly. If you click OK, perform the action correctly; click Cancel to exit the window; B gives sufficient hints about illegal inputs or operations. For example, when the number of days per month is 32, when you click OK, the system should indicate that the number of days should not be greater than 31; C must give confirmation information to the user who may cause data to be unrecoverable and give the user the opportunity to abandon his choice; 3, radio button control test Test method: A and a group