监控系统常见的故障现象及其解决方法(集合)（Common faults in monitoring system and their solutions (set)）.docVIP

监控系统常见的故障现象及其解决方法(集合)（Common faults in monitoring system and their solutions (set)） Monitoring system common faults and their solutions (Collection).Txt why do we always add stories when were telling stories? The summer flowers, finally ended up smashed to pieces still smile, say. Monitoring system common fault phenomenon and its solution - by Suzhou monitoring system, Suzhou remote monitoring system, Suzhou home monitoring system, Suzhou travel monitoring system, monitoring equipment, camera provides. (a) In a monitoring system into the commissioning phase and commissioning phase and after delivery, there may be such a failure phenomenon, such as: normal operation, system is not up to the technical index, the design requirements of the overall performance and quality is not ideal, that is some soft faults. These problems are unavoidable for a monitoring project, especially for a complex and large-scale monitoring project. 1. equipment failure caused by incorrect power supply. The incorrect power generally has the following several possibilities: power lines or power supply voltage is not correct, the power is not enough (or a road supply line size is not enough, the big buck), transmission line power supply system of the short circuit, open circuit, instantaneous overvoltage etc.. In particular, equipment failures due to power supply errors or transient overvoltage have occurred. Therefore, in the system debugging, before power supply, we must seriously and strictly check and check, should not be taken lightly. 2. for some equipment (such as PTZ cameras and lenses with three variable) has many links, if not handled well, especially with the equipment connecting lines are not handled properly, there will be open circuit, short circuit, wire insulation, as a result of adverse false wiring damage, equipment performance drop problem. In this case, according to the phenomenon of failure calmly analysis, to judge in a number of lines is due to what the connection of the