联轴器的选用（Selection of couplings）.docVIP

联轴器的选用（Selection of couplings） Selection of couplings The coupling type, varieties, specifications, based on the correct understanding of varieties, types and specifications of their concepts, to select the coupling according to the transmission needs, first of all from the choice of the coupling to the standard have been set in, I have been making coupling for international and industry standard have dozens of these standards is the most universal coupling shaft coupling, a coupling universal coupling, each has its own characteristics and suitable range, can basically meet the needs of a variety of conditions, general designer does not need to design their own coupling, only in the existing standard couplings can not meet the needs to design their own coupling. Standard couplings are easy to purchase and much cheaper than self designed non-standard couplings. In many standard couplings, the correct choice for your needs best coupling, a series of problems related to the mechanical product performance, reliability, service life of shafting, vibration, noise, energy saving, transmission efficiency, transmission accuracy and economy, but also to the quality of mechanical products. When choosing the coupling, the designer should base on the angle of shaft drive and choose the coupling, and should avoid only considering the main and driven ends, and choose the coupling. First, select the factors that should be considered in the coupling (1) mechanical characteristics of a power machine Between the power machine and the working machine, the main and driven ends are connected through one or several couplings of different types and specifications to form a shaft transmission system. In mechanical drives, power machines are no more than motors, internal combustion engines, and gas turbines. Because the working principle of the power machine and the mechanism are different, the mechanical characteristics of the engine vary greatly, some of them run smoothly, some have impact