聚氨酯泡沫（Polyurethane foam）.docVIP

聚氨酯泡沫（Polyurethane foam） Open classification of polyurethane foams: chemical products, Applied Sciences, materials science Edit entry share New information agency, Sina, micro-blog, Renren, Tencent, micro-blog, mobile lobbyists, NetEase, micro-blog, happy 001, Tianya MSN Polyurethane foam adhesive is a kind of special polyurethane product which is packed with polyurethane prepolymer, foaming agent, catalyst and so on. When the material is ejected from the aerosol tank, the foamed polyurethane material expands rapidly and solidified with the moisture in the air or the matrix in contact with the foam to form a foam. The cured foam has many effects, such as caulking, bonding, sealing, heat insulation, sound absorption and so on. It is a kind of environmental protection, energy saving and easy to use building material. But its also a very flammable substance. Edit summary Catalog 1 Performance Specification 2 usage 3 typical applications 4 state classification 5 using skills 1 Performance Specification 2 usage 3 typical applications 4 state classification 5 using skills 6 matters needing attention 7 market outlook 8 safety accidents Polyurethane foam - Performance Specification General dry time table in 10 minutes (at 20 DEG C environment), dry time with the environmental temperature and humidity varies, in general, the summer dry time of about 4-6 hours, winter around zero to 24 hours or longer to dry. Under normal conditions of use (and in the case of the appearance of a cover layer), to estimate the service life of not less than ten years in -10 to 80 DEG C in curing foam had a good elasticity and adhesion. The cured foam has the functions of caulking, bonding and sealing. In addition, flame retardant polyurethane foaming agent can reach B and C grade flame retardant. Polyurethane foam - Methods of use Step 1: shake it 15-30 times before use, up and down; The second step: before construction, clean the filling area and spray it with water; The third step: turn the ta