基于PSCAD的直流斩波电路的仿真.pdfVIP

∀#2010 13 324 基于PSCAD 的直流斩波电路的仿真 汤仁彪 ( , 214405) :现代电力电子技术其理论性和实践性较强, 电路和波形图多且复杂在电磁暂态 析软件 PSCAD 中建立 Buckchopper 电路的仿真模型, 在此基础上对直流斩波电路进行了较详细的仿真 析仿真波形与常规 析方法得到的结 果 一致,证实了PSCAD 软件能够在电力电子技术仿真和研究中具有较好的应用价值 :PSCAD; 直流斩波电路; 建模; 仿真 :T M13 :A : 1004373X( 2010) Simulation of DC Chopping Circiut Based on PSCAD T AN Renbiao (Jingyin Polytechnic College, Jiangyin 214405, China) Abstract: A simulation model of Buckchopper circuit was established in electromagnetic transient analysis software PSCAD. The simulation analysis of DC chopping circiut is performed attentively on the basis of the model. The simulation waveform is consistent with the results gotten by the method of conventional analysis. The result confirms that the PSCAD software can be applied to the power electronics technology simulation and research. Keyw ords: PSCAD; DC chopping circiut; modeling; simulation , : ton S; toff S ; Ts ; , D , D = ton/ T s , [ 15] , PWM ( ) (Buck Chopper) , PSCAD,, , 图1 带纯电阻负载的降压斩波器工作原理 , D, 1 Uo D 0~ 1, [67] 1( a) Uo Ud, S ;R 2 PSCAD S t on , Uo Ud S toff PSCAD ,, 1(b) :