八重洲7800说明书（YAESU 7800 manual）.docVIP

八重洲7800说明书（YAESU 7800 manual） YAESU FT-7800R basic operations Now YAESU FT-7800R some basic functions, methods of operation announced, convenient for everyone to operate. Set frequency 1. set on host (1) turn on the power (2) press the (V/M.MW) key to enter the VFO (frequency) state; (3) the short press (BAND.SET) key sets the frequency bands you will use, such as 144 or 430 or 850 segments; (4) rotate the channel knob to set the frequency you want to use, and press the (MHz.PRI) button to adjust the frequency directly to display the digits before the decimal point. 2. set it directly with your hand (MH-48, hand, MIC) (1) turn on the power; (2) press the (V/M.MW) key to enter the VFO (frequency) state; (3) direct the number of frequencies you want to use with the numeric key on your hand. Two. Set sub audio According to the 1. key (BAND.SET) for more than a second, enter the menu, with a rotating knob to select the menu item forty-fourth channel TN FRQ, press (BAND.SET) key to enter this option, you need to use the value selection of sub channel rotary knob, and then press the button (BAND.SET) for more than a second, exit menu. 2. click (TONE.HM/RV) button, ENC display, 3 seconds after the automatic return frequency display, the screen will display the ENC small, subsonic. Three. Setting frequency difference 1. the elimination of the default sound. According to the sub station (BAND.SET) key for more than a second, enter the menu, with a rotating knob to select channel fourth ARS menu, press (BAND.SET) key to enter this option, by rotating the knob to select the OFF channel, and then press the button (BAND.SET) for more than a second, exit menu. 2. set the frequency difference value. According to the (BAND.SET) key for more than a second, enter the menu, with a rotating knob to select channel thirty-ninth SHIFT menu, press (BAND.SET) key to enter this option, you need to select the difference frequency value of the rotary knob channel (BAND.SET), and then press the