automotive iso 9141 serial link driver - qclt（汽车iso 9141 - qclt串行连接驱动程序）.pdf

MOTOROLA SEMICONDUCTOR MC33199 Automotive ISO 9141 Serial Link Driver The MC33199D is a serial interface circuit used in diagnostic applica- ISO 9141 SERIAL tions. It is the interface between the microcontroller and the special K and LINK DRIVER L lines of the ISO diagnostic port. The MC33199D has been designed to meet the «Diagnosis System ISO9141» specification. The device has a bi-directional bus K line driver, fully protected against short circuits and over temperature. It also includes the L line receiver, SEMICONDUCTOR used during the wake up sequence in the ISO transmission. TECHNICAL DATA The MC33199D has a unique feature which allow transmission Baud rate up to 200kBauds. • Electrically Compatible with Specification “Diagnosis System ISO9141” • Transmission speed up to 200kBauds • Internal Voltage Reference Genarator for Line Comparator Thresholds • Txd, Rxd and LO pins are 5V CMOS Compatible • High Current Capability of DIA pin (K line) • Short Circuit Protection for the K Line Input • Over Temperature Shutdown with Hysteresis • Large Operating Range of Driver Supply Voltage • Large Operating Temperature Range • ESD Protected pins Block Diagram and Typical Application Vcc VS REF-OUT Reference Protection PIN CONNECTIONS Generator LO + L C2 VCC 1 14 REF-OUT -