天正命令（Day order）.docVIP

天正命令（Day order） The order of the building Axis network menu Rearrangement axis number CPZH changes a set of axis numbers in the graph, which are automatically reordered The inverted shaft number DPZH inverted axis number is suitable for drawing the vertical profile axis in a particular direction The single axis change number DZBH changes only the number of the single axis in the graph Draw the axis mesh HZZW, including the old version of the linear axis network and the arc axis network Select the starting axis and the end axis of the two axis mark LDZB, and mark the axle numbers and sizes The wall generating net QSZW generates a positioning axis in the existing wall at the base line of the wall Delete the axis number SQZH, delete the axle number on the existing axis network, and the rest of the axle number is automatically rearranged Fill in the TBZH Axis axis number based on the associated increase in new shaft No. Add radial shaft TJJZ, add new radial axis on existing arc axis net, and insert axle number Add the axis TJZX, increase the axis on the existing axle network, and insert the axle number Draw the axis mesh HZZW, including the old version of the linear axis network and the arc axis network Point by point axes ZDZB, select the axis one by one, and mark the number of axes not related The axis is cropped and ZXCJ cuts a part of the web with a rectangle or polygon Linetype of shaft changing line ZGXX switching axis Column menu A standard column BZZ inserted into a square column, column, or polygonal column at the intersection of an axis The constructional column GZZ illustrates the constructional column of a given width and length at the corner JZ into the corner corner shape and uniform wall in the corner, the segment length can be set The special-shaped column YXZ turns the column section defined by the closed Pline into nonstandard special-shaped columns The column wall is ZQQB and the post is aligned to the wall Wall menu Align the line on the BXDQ wall, a