catia与ug（Catia与ug）.docVIP

catia与ug（Catia与ug） If the parts into engineering drawing the wrong drawing size, such as A3 will be selected as the A4 paper, in the Drafting environment, click File to Page setup, in the pop-up dialog box to select the required drawings. 6. activate views In engineering drawings, operations such as sectional view, local enlargement and fracture are often performed on a view. Before you do that, you must activate that view. Beginners often ignore this problem and cause the operation to fail. There are two ways to activate a view: (1) move the mouse to the blue border of the view, and double-click the mouse to activate the view. (2) move the mouse to the blue border of the view, right-click the mouse, and select Activate View in the pop-up menu. Insert frame and title bar 7. in engineering drawing (1) the first drawings the size of the frame title bar made of various engineering drawings were inserted into the template. The specific operation is as follows: enter drafting, select the size of drawing, into the Edit, Background, according to the required standard drawing frame and title bar, save it. In the drawing of the engineering drawings, enter File and Page setup, select Insert Background View in the pop-up dialog box, select the corresponding frame format, click Insert button. (2) in the projection view, insert the frame and title bar to make a good. The specific operation is as follows: in the part model to establish a good environment, click File to New from, according to the projection view need to choose the advance of the frame drawing template file size, can be directly inserted into the frame and title bar of the Drafting state. 8., solve the icon into English annotation method In the process of using CATIA software, met Part Design and Assembly Design in the original image of the very tool icon into English expressed with the form of the word, such as chamfer into ChamferHeader, stretching into PadHeader, the use is very inconvenient. The reason may be t