gp68说明和简易使用手册(Gp68 instructions and easy to use manual).docVIP

  • 8
  • 0
  • 约6.95千字
  • 约 10页
  • 2017-07-24 发布于河南
  • 举报

gp68说明和简易使用手册(Gp68 instructions and easy to use manual).doc

gp68说明和简易使用手册(Gp68 instructions and easy to use manual)

gp68说明和简易使用手册(Gp68 instructions and easy to use manual) Gp68 instructions and easy to use manual GP68 handheld radios have VHF (136-174MHz) and UHF (403-433MHz / 430-470MHz) two bands, which allow users to choose the frequencies they need in a more flexible manner depending on their work environment. Flexible and programmable GP68 handheld walkie talkie can preset a variety of forms of operation to meet your communication needs. Including flexible programmable parameters: 5, 10, 12.5, 15, 20 and 25KHz increased step frequency, transmitted to the receiving relay frequency offset up to 20 storage channel, Channel private line and digital private line code, DTMF, PTT identity codes, single call, group call, group call DTMF identity code DTMF coded keyboard (with keyboard type) The latest GP68 keyboard handheld walkie talkie is equipped with DTMF (dual tone multi frequency) key, can use the walkie talkie on the 4x 3 keyboard operation board coding, and the city network interconnection. The keyboard includes DTMF numbers (0-9) and letters A, B, C, D, plus symbols * and sums. In addition, DTMF telephone connection function also includes the last number redial and storage to 9 12 digit telephone number function. Other functions 2 Built in carrier squelch, private line (PL) and digital private line (DPL) 0-15 adjustable squelch High and low power selection (VHF5 / 1W, UHF4 / 1W power output) Code that is connected or not connected to the telephone (with keyboard type) - the last number redial (keyboard type) Multi function seven bit backlit LCD display Keyboard lock / unlock Power saving function Double box battery power-saving device Receive signal strength display Programmable time limiter GP68 quick programming manual I. agent programming status: 1. Enter the agent programming status: Press (PTT+ green key +SCAN) at the same time. 2. Quit the programming status of the agent and press (PTT+ green key + Huang Jian) to turn on the machine. Two. Programming: 1. Press 2. Pres

文档评论(0)

1亿VIP精品文档

相关文档