钢筋腐蚀光纤传感器的研究-深圳大学.PDF

10 !测控技术∀2001 年第20 卷第8期 : 1000- 8829( 2001) 08- 0010- 02 钢筋腐蚀光纤传感器的研究 Research on an Optical Fibre Sensor for Reinforcement Corrosion ( , 518060) , , , : 将钢筋利用真空镀膜沉积在光纤 纤芯上, 使之 , 形成敏感光纤, 从而制备了用于监测模拟混凝土结构 钢筋腐蚀 光纤传感器, 该方法基于光纤纤芯上 敏 , 感膜能够将腐蚀信息传递给光纤内传导 光波, 从而 获取腐蚀信息, 实现腐蚀监测对光纤传感器上钢筋 , 膜 腐蚀传感能力 研究, 证明了采用光纤传感技术 , 监测混凝土结构钢筋腐蚀是可行 , , : 光纤传感器; 智能结构; 钢筋腐蚀; 真空镀膜 , , : TN201 : A , , , , Abstract: An optical fibre sensor for sensing the corrosion , , egree on reinforcement in concrete construction consists of 3 Men ez [ 1,2] parts: a photoemitting circuit, a photoreceiver circuit an a 1989 sensitive optical fiber which is ma e after its core has been , [ 34] plate with reinforce steel bar membrane. On the core of the optical fibre, the vacuum plate sensitive film can transmit the corrosion information to the light w ave which is trans porting insi e the fibre. In this way, corrosion information , , can be etecte . Researches into the sensibility to corrosion of the reinforce steel film which is on the core of the optical , , fibre have prove that it is feasible to apply optical fibre sen , sor technology to monitor the reinforcement corrosion in con crete construction. 1 Key words: optical fibre sensor; smart constructure; rein forcement corrosion; vacuum coating