管 道 保 温 层 厚 度 的 计 算 方 法（Method for calculating thickness of pipeline insulation layer）.docVIP

管 道 保 温 层 厚 度 的 计 算 方 法（Method for calculating thickness of pipeline insulation layer） Calculation method of thickness of pipeline insulation layer (three methods) (1) by controlling the outer surface temperature of the insulating layer; The temperature of the medium in the pipeline is t= 95 The outer surface temperature of the main insulation layer is tw1= 34.66 tw1=33.4+0.028 * (T - 50) (or direct input according to process requirements) The average temperature of insulation layer is tp= 64.83 tp= (t+tw1) /2 The thermal conductivity of the insulating material at TP temperature is W/m DEG C 1= 0.048 The outer diameter of pipe is m dw= 0.219 The air temperature around the pipe is tk= 28 Wind speed outside the duct m/s omega = 4 The heat release coefficient of the surface of the insulating layer to the surrounding air is W/ (M2 = k), alpha h= 25.53, alpha h=11.63+6.95 * * 0.5 A pipe main insulation layer outer diameter is d1: d1/dw * ln (d1/dw) = 0.1556 d1/dw * ln (d1/dw) =2 * 1 * (t-tw1) / lambda alpha h * DW * (tw1-tk)] Make d1/dw x ln (d1/dw) =x. LNX lookup table: X. Lnx= 0.1556 input, see Table 1 later The x= 1.147 input is shown in Table 1 later The thickness of the insulating layer is m = 0.0161 = /2= = d1-dw (x-1) * dw/2 (two) calculation by controlling the maximum heat loss The temperature of the medium in the pipeline is t= 95 The average temperature of insulation layer is tp= 70. When the insulation thickness is calculated by this method, the outside surface temperature is unknown and the average temperature is checked in Table 2 The thermal conductivity of the insulation material is W/m DEG C, lambda 1= 0.048 input Pipe outer diameter m dw= 0.219 input The air temperature around the pipe is tk= 28 The heat release coefficient of the insulating layer to the surrounding air is W/ (M2 = k), alpha h= 0.034 The maximum heat dissipation of the unit surface is Q q= 93. Check table 4 The main insulation layer of the pipeline is d1:, d1=, 0.3527 ln (d1/dw), =2 * 3.