箱梁节段预制与拼装施工监理（Construction supervision of precast and assembled section of box girder）.docVIP

箱梁节段预制与拼装施工监理（Construction supervision of precast and assembled section of box girder） The storage sequence of box girders shall be set up scientifically and reasonably. (3) the number of storage shall be calculated after the approval of the engineer. 2.2 section box girder assembling Check the 2.2.1 before shipment (1) before shipment by check number, frame beam and matching surface cleaning pipe flow. (2) the pier top block needs two times pouring should be reinforced banding, and embedded parts installation template. 2.2.2 pier top 0# block installation (1) install the support before installation, and the top surface roughness and the four angle elevation should be strictly controlled. (2) after installing and placing the pier top block, the 4 positioning jack shall be accurately positioned. The positioning standard shall be the axis deviation 5mm and the elevation + 10mm. (3) accurate positioning after passing the temporary anchorage of pre-stressed pier top block 0#. 2.2.3 standard T box girder assembly Segmental box girder erection (1) the assembly shall be carried out before the erection of the segmental box girder, in order to verify the close relation between the box girders and prepare for the formal assembly. (2) segmental box girder joint with epoxy adhesive bonding of Italy sika, construction should be selected according to the type of epoxy adhesive construction temperature. (3) check whether the bellows gasket is well arranged before gluing, and ensure that the thickness of the coating is uniform, and not less than 3mm. If you need to pad the epoxy gasket, the coating should be higher than the gasket 1mm. (4) when the prestress is tensioned in the body, the construction shall be carried out strictly according to the provisions of the drawing, and the tensile stress and elongation (+ 6%) shall meet the requirements of the specifications. When all the prestressing forces are tensioned, the main hook of the bridge erection machine can be lifted. (5) vacu