MA5616开局配置步骤（MA5616 start configuration step）.docVIP

MA5616开局配置步骤（MA5616 start configuration step） Huawei MA5616 is a multi-service access device, which supports multi-business access as MDU device, including broadband, voice and video, etc. Its business slot is full of four, supporting ADSL, VDSL2 and POTS business board, and ADSL and VDSL2 cannot be used simultaneously, but POTS can be used in combination with ADSL and VDSL2 respectively. Among them, 1, 2 and 3 slots of MA5616 are narrow-band business boards, 4 slots are the broadband business boards, and the data configuration of MA5616 opening script is given in this paper: The root mduadmin The enable The config Board confirm 0 / / check all single panels in the frame (unconfirmed, the single board is automatically found to be unusable) Device naming MA5616 (config) # sysname MA5616 Sysname hw-onue015753 / / device naming must be in accordance with BSS naming conventions Swlan / / switch language type Create priority policies: Traffic table IP index 7 cir off priority 7 priority - policy local - Setting / / ITMS vlan45 business priority is 7 Traffic table IP index 8 cir off priority 6 priority - policy local - Setting / / voip vlan4050 business priority is 6 Traffic table IP index 9 cir off priority 5 priority - policy local - Setting / / itv vlan43 business priority is 5 Traffic table IP index 10 cir off priority 0 priority - policy local - Setting / / PPPOE according to the users actual vlan business priority level is 0 Second system time MA5616 (config) # time 2010-08-23 14:15:16 / / modify system time Ntp-service unicast - server 172.19.2.2 or 172.19.2.8 sour-interface vlanif device management VLAN / / setting the network clock Configuration of three network tube parameters MA5616 (config) # SNMP - agent community read public MA5616 (config) # SNMP - agent community write private M5616 (config) # SNMP - agent target-host trap-hostname N2000Server address 125.127.254.65 udp - port 162 trap-paramsname private MA5616 (config) # SNMP - agent target-host