何谓快门速度的安全限度（What is the shutter speed limit）.doc

何谓快门速度的安全限度（What is the shutter speed limit） Usually people take pictures, photometry is measured on the face, or even more stringent, measured in the eye. Use central metering Focus or spot metering, move the metering points in the viewing window to the position of the face, measure the light, then move to the correct composition, press the shutter. Because we usually use the negative portrait, so the best exposure point about 0.3 to 1, when flush will have better effect. Over under negative, positive, many photographers often mention the pithy formula. aperture To take a portrait, the author uses a large aperture to obtain a shallow depth of field. In the case of the main proportion is not very large, it will be more prominent. Another advantage of using the large aperture is that the shutter speed is not slower than the safe limit when the weather is darker. Aperture size contrast shutter speed What is the limit of safety shutter speed? Is a critical value, faster than the limit speed, can avoid because of hand shaking, moving and perturbation caused by the fuzzy picture, but the shutter safety limit It differs from man to man. First, see if the subject is moving the aperture and the shutter contrast Moving and moving, the moving person usually freezes the picture, and the 1/250 may be more secure. If the receiver is stationary, the tripod on the camera rack, about 1/8 seconds, or even 1/4 seconds, can freeze. Again, we consider the stability of the photographers skill, each persons hand stability is different, about 1/60 seconds, and the picture is not blurred, is everyone can achieve. For example, the hand stability is not good, probably 1/30 following it, the tripod, colleagues may wish to try their handheld security limits are? Summary, shooting fixed model, handheld 1/60 seconds should be no problem, in the shooting moving model then use 1/250 seconds above! 4 portrait, photography, editing, life and photography, light is the most important factor in the for