abb通讯（ABB communication）.docVIP

abb通讯（ABB communication） Data communication between SIEMENS PLC and ABB inverters based on 09-10-08, Profibus-DP, published at 14:07: Nanjing road Automation System Co., Ltd. classification: not classified This paper introduces the data communication of SIEMENS SIMATIC S7-300 series PLC and ABB ACS600 series transducer through Profibus-DP field bus. The system configuration and communication protocol, the hardware configuration of the STEP7 programming software environment, the communication programming and the operation parameters setting of the inverter are discussed. 1, introduction Profibus is one of the most successful field buses in industrial control system, and has been widely used. It is an open field bus that does not depend on the manufacturer, and all kinds of automation devices can exchange information through the same interface protocol. Profibus-DP (DistributedI/OSystem, distributed I/O system) is an optimized module with high data transmission rate, suitable for communication between the system and external equipment, and the remote I/O system is particularly appropriate. It allows high speed, periodic, small batch data communication, and is suitable for automatic control systems with time constraints. The Profibus-DP bus system can make many field devices (such as PLC, intelligent transmitter, frequency converter) two-way digital communication information on the same bus, so you can easily use the control and measurement system of different manufacturers are connected into a network through flood. Jinan Baode color plate Co. Ltd is an annual output of 200 thousand tons of large color plate production base of Jinan Iron and Steel Group Company in 2003 to invest in the construction of the gas system of the production line in curing oven, heat-conducting oil furnace, hydrogen gas in the gas must through the gas compressor and the two compression production process to meet the requirements, gas compressor control system the process of using Profibus-DP