cad修改编辑图形（CAD modify edit graphics）.docVIP

cad修改编辑图形（CAD modify edit graphics） CAD command usage: 1\ image: input mirror (MI) or by dragging the mouse icon, select the object to be mirrored box, enter (or the first space or the right mouse button, and then enter the mirror) is a mirror image of the line, the system will ask you whether to retain the original object, you can choose a default (reservation). Reservation means that after you have completed this command, the original object you want to mirror is not deleted. 2\: the tensile tensile command, select the rectangle on the right side of the intersection of three sides from right to left (i.e. a two vertical and horizontal edges on the right side), enter in the drawing area, the mouse to click the mouse, to the right, the two rectangular transverse edge is stretched, press the F8 key to orthogonal open horizontal stretch, then enter the stretch distance on the command line, enter enter after, tensile! Box selection object directly enter, use the mouse to drag a corner of any stretch. 3\ zoom: use the scaling command (SC) to zoom in or enter the shortcut command (SC), select the object to be scaled, specify the base point, specify the scaling factor, or R [reference (C) / reference (R)] input. The specified reference length is the point of the object to be scaled, the base point specifying second points, specifying the new length or [P], entering the P, and specifying the first point: specify the second point: thats ok. After entering the SC command, the blank space, box, select the graphics you want to zoom in, the space, select a base point to lose, enter a value. Enter。 Note: the point chosen is very important. The unit is one by one. You double it by entering 0.5. Enter 2 and double it. Or first select the object, enter SC, select a base point, enter the number of proportional, enter. 4\ array: Method 1. Select objects, point array tools, or commands. Select the ring or rectangle array in the resulting dialog box, and then enter the array with inexp