rt底片评定（RT film evaluation）.docVIP

rt底片评定（RT film evaluation） RT negative evaluation.Txt Preliminary and intermediate nondestructive testing qualification personnel - radiographic examination questions compilation The choice question (the correct number letter will be inserted into the brackets behind the question, and only one answer can be selected) Basic theory, equipment operation, process protection evaluation 2. can detect defects in radiographic images is the direction of the minimum size (a): A. contrast B. unsharpness above C. particle size is d. The smallest detail that can be recorded on a 3. - ray film is determined by (c): contrast, B., clarity, C., graininess, D., or more The concept of 5. - Radiographic sensitivity is used to describe (d) The ability to record and display details of A. ray photographs, B. ray photographs, and the ability to display defects C. ray radiography can find the qualitative evaluation of the minimum defect capacity above D. The concept of 6. - Radiographic sensitivity is used to describe (a) The ability to record and display details of A. rays; the smallest defect size that can be found in B. radiography C. radiography is capable of quantitative evaluation of minimum defect capacity above D. The concept of 7. - Radiographic sensitivity is used to describe (b) The minimum size of defects that can be found in A. radiography. The ability to record and show defects in B. - ray photographs C. radiography is capable of quantitative evaluation of minimum defect capacity above D. The 8. is through the assessment of radiographic sensitivity (a) showed that A. densitometer B. film density C. film definition D. none of the above The absolute sensitivity of the 9. - ray sensitivity is (b) The smallest defect size found in A. - ray photographs; the smallest possible size of an image identified in B. - ray photographs C. does not have the same image quality index above D. as for all the mass meters 10. in radiographic inspection, the ability to detect minimum defects is cal