结构通用说明的.docVIP

General Notes on Structural Design Construction General Indoor structural floor level ?0.000 of this project equals to Yellow Sea elevation 3.700m. Level difference between indoor floor and outdoor ground is 300mm. Structural type: framed structure. Unless otherwise indicated, all dimensions are in millimeter (mm) and levels in meter (m). Natural conditions: Basic wind load: 0.45KN/m2 Basic snow load: 0.40KN/m2 Underground water has no corrosion to concrete. Liquefied soil do not exist in foundation bed. Ground roughness is of Category B. Basic earthquake intensity: Grade 6. Building anti-seismic design: based on Category C, Grade 6.Basis acceleration: 0.05gAnti-seismic design: based on 1st group Site category: Category III.Design characteristic interval: 0.45 sec. The structural design is based on service life of 50 year, structural safety grade 3, structure importance factor ?0= 1.0 and foundation design Grade C. Masonry construction quality control grade is Grade B. Fire resistance rating of the building is Grade 2. Frozen soil depth: not considered. Design Basis Environment category: Category I, II(a) and II (b). Codes, regulations and standards- “Building Structure Loading Codes” GB50009-2001- “Concrete Structure Design Codes” GB50010-2002- “Building Anti-seismic Design Codes” GB50011-2001- “Building Foundation Design Codes” GB50007-2002- “Masonry Structure Design Codes” GB50003-2001- “Technical Regulation for Pile Foundation” JGJ94-94- “Construction Structure Construction Quality Acceptance Codes” GB50204-2002- “Foundation Construction Quality Acceptance Codes” GB50202-2002- “Building Structure Reliability Design Standards” GB50068-2001- “Technical Regulation for Rebar Mesh Concrete” JGJ/T114-97- “Integral Plane Drafting Rules and Details for Structure Construction Drawings”  03G101-1- “Anti-seismic Construction Detail”03G329-1 “Soil Survey Report”A-2004-014 dated Feb., 2004 prepared by South-west Survey Design institute. Input and requi