仪表宣传（Instrument promotion）.docVIP

仪表宣传（Instrument promotion） Temperature: Pt100, thermocouple, bimetal, temperature switch, etc. Pressure: pressure gauge, pressure transmitter, differential pressure transmitter, pressure switch, etc. Liquid level: magnetic turn plate, in situ glass, ultrasonic, radar, float, liquid level switch and other forms Flow rate: rotor, electromagnetic flowmeter, vortex flowmeter, etc. Analysis: water, oxygen, carbon dioxide, densimeter, etc. Valve: self regulating valve, on-off valve (pneumatic, electric), regulating valve (pneumatic, electric), etc. Basic knowledge of instrument flow papers 1. commonly used standard throttling device (Kong Ban), nozzle (Venturi tube). 2. commonly used non-standard throttling device (double orifice plate), (round hole plate), (1/4 round nozzle) and (Venturi nozzle). 3. hole plate commonly used to take pressure method (angle to take pressure), (flange pressure), other methods are (theoretical pressure), (distance from pressure) and (pipe to take pressure). 4. standard orifice flange pressure method, the upper and lower downstream take the hole, the center distance from the hole plate front and rear end spacing is (25.4 + 0.8) mm, also known as 1 inches flange pressure. 5.1151 transmitter operating power range (12) VDC to (45) VDC, load from (0) ohm to (1650) ohm. The measuring range of 6.1151DP4E transmitter is (0 ~ 6.2) to (0 ~ 37.4) Kpa. The maximum positive displacement of 7.1151 differential pressure transmitter is (500%), and the maximum negative transfer is (600%). 8. the velocity of fluid in a pipe, generally, is the maximum velocity at the center of the pipe, and the velocity at (Guan Bi) is equal to zero. 9. if the Reynolds number is the same, the motion of the fluid is similar. 10. when a fluid filled pipe flows through a throttling device, the flow beam will take place (necking) at the choke point, thereby increasing (flow rate) and decreasing (static pressure). 11.1151 the differential pressure transmitter adopts variable capacit