5s检查100条050720（5S check 100 050720）.doc

5s检查100条050720（5S check 100 050720） 1, on the workbench of consumables, tools, fixtures, sensors and other useless or temporary useless goods must be taken away 2, the production line should not be placed in excess goods and no falling parts 3, the ground can not be placed directly finished products, parts and parts 4. The defective products are placed in the defective area The work area shall be marked and separated 6, the work area should be placed in the overall sense of goods 7, different types and uses should be separated from each other 8, private goods should not work out in the work area 9, the power cord should be managed, should not be confused or thrown to the ground The color of the adhesive tape should be clear (green is fixed, yellow is moving, red is bad 11, pallet, plastic box should be placed in parallel and vertical 12, no used fixtures, tools, blades should be placed on the tool rack 13. The mould, tools, blades and items that are not used for a long time on the jig shall be separated 14. Do not place any other objects where the measuring tools are placed 15. the assembly machine equipment can not put unnecessary items 16. Is the placement method of the job tool easy to place? 17, jobs can not put unnecessary tools 18, the jig can not be placed outside the fixture debris 19, parts racks, work tables, cleaning cabinets, garbage bins should be placed in the designated sign at the right angle rectify Consumables, tools, fixtures and gauges shall be placed at the right angle in the designated sign place 21, car, boxcar, cart, forklift should be placed in the designated place mark level angle 22, parts, parts box should be in the designated signs at the level of the right angle neatly placed 23, finished products, finished goods boxes should be placed in the designated sign location 24, parts should correspond to coding, encoding can not be blocked Empty, can not escape, to be neat and beautiful and timely recovery 26. The bottom panel is placed at the