手动设置虚拟内存（Manually set up virtual memory）.doc

手动设置虚拟内存（Manually set up virtual memory） But the default management methods are usually more conservative, in the automatic adjustment will cause the page file is not continuous, and reduce the efficiency of reading and writing, the work efficiency is not high, so often there will be a memory of such tips, lets do it yourself to set it. Right-click the my computer icon on the desktop, and select the properties option in the right-click menu to open the system properties window. In the window, click the Advanced tab to appear in the advanced settings dialog box Click the settings button in the performance area, and select the Advanced tab in the appear performance options window to open the dialog box. In the dialog box, you can see the area about virtual memory, and click the change button to enter the settings window of virtual memory. Select a large spare capacity of the partition, select custom size check before the box to fill in specific values of initial size and maximum value column, and then click settings to determine button, finally restart the computer to set the virtual memory effect. Recommendations: you can partition a small partition, specifically for the virtual memory, IE temporary file storage, etc., and then you can regularly partition the disk, so as to better improve the efficiency of the computer. First, tailored virtual memory 1. general setting method According to the arrangement of the general method, the virtual memory swap file minimum and maximum at the same time can be set to 1.5 times the memory capacity, but if the memory capacity is relatively large, such as the memory is 512MB, then it is also the space of considerable. So we can set the basic numerical virtual memory: memory capacity below 256MB, is set to 1.5 times; in more than 512MB, is set to half the memory capacity; between 256MB and 512MB is set to the same value and memory capacity. 2. precision setting method Due to the application of each operation can not be the same, for