木雕作品的制作工序（The making of wood carvings）.docVIP

木雕作品的制作工序（The making of wood carvings） The production process of wood carving works Wood manufacturing process includes: carpentry, screwing, how to live, live live chisel, shovel, file, grinding, paint, wax, paint work. 1, carpentry: woodworking with the production to be carved furniture components, including components, appreciation of the basic outline and so on. 2, rotary live: a wood turner with the production to be carved components, such as pen shape and bore, wood block face, teeth, waisted etc.. 3, only live: refers to the pattern cut flower plate with wire saws, achieve similar to the silhouette effect to be carved standby. The above is the preparation process of engraving. 4, live: chisel chisel live chisel and pat axe or hammers, chisels to blocks of basic shapes, basically forming fine chisel to work, ready to work for the live and live shovel. 5: fine processing, shovel Live Live chisel shovel to shovel, without a trace of blocks and to meet the design requirements of the spirit, and then hook assign work to the best results. 6, file live: rasp is chisel tool, especially for hollow fine flower plate inside the wall, rasps plays a big role. 7, grinding activities: the system of transmission, the first water, so that wood thorn fried, and then sand paper or file grass grinding pulp, so that wood surface clean. Now use the high mark water sand paper instead of the same effect. 8, color: This is a deep technical knowledge, a work burden when combined with careful, after water color will also appear, rely on experienced painter of the dark to light shallow or deep, make color consistency. 9, tangla: wax live crafts high-end surface treatment method. The traditional way is to use wax and beeswax according to different seasons make different formula made wax paste, using charcoal fire into the wood, until the wax cold after the wax tick net. Apply wood carvings Wood carving of timber requirements are more stringent, the line said: do not stand to live.. The h