夏普AR2718全系列维修代码（SHARP AR2718 full range of maintenance code）.docVIP

夏普AR2718全系列维修代码（SHARP AR2718 full range of maintenance code） SHARP AR2718 full range of maintenance code SHARP AR2718 # insert. C insert. 20-1 42-1 24-6 (20-1 light, clear clear villain maintenance count, 42-1 lamp light clear - small clear carrier count, 24-6 count clear input) With detailed operation process: 1, small lights clear - clear maintenance count: # insert - C - Insert - 20 - - 1 - start button start button, the whole machine to remove CA - complete. 2, a small lamp lit clear - clear carrier count: # insert - C - Insert - 42 - - 1 - start button start button, the whole machine to remove CA - complete. 3, clear the paper count: # insert - C - Insert - 24 - - 6 - start button start button, the whole machine to remove CA - complete 1-1 confirm the mirror device action 1-2 confirm sensor action of optical system 1-6 mirror scanning continuous action 2-1 SPF continuous action 2-2 confirm the SPF sensor action 2-3 make sure the SPF motor is moving in the direction of moving 2-4 make sure the SPF motor reverses direction 2-8 confirm the SPF feed solenoid action 2-9 RSPF turn electromagnet movement check Check the electromagnet movement of the 2-10 RSPF door 2-11 make sure the SPF PS releases the solenoid valve action 3-2 make sure the move sensor action is removed 3-3 make sure the pager moves moving 3-4 confirm the movement of the separation plate (check if it is turning properly) The 3-11 page for in-situ action confirmation 5-1 make sure the buckle panel shows (panel LED lights are all bright seconds) 5-2 make sure that the heating lamp is on (50 seconds on the fuser light and 5 times) 5-3 make sure the copier light is on (10 seconds concentration key to change brightness) 6-1 confirm the action of the feed solenoid valve (50 seconds interval drive 20 times) 6-10 drive main box half round roller 7-1 preheating time means JAM aging 7-4 preheat omitted 7-6 intermittent aging with paper 7-8 preheat time indication 8-1 copy mode development bias output 8-2