如何得到想要的网点（How do I get the desired network）.docVIP

如何得到想要的网点（How do I get the desired network） How do I get the desired network? How do I get the desired network? If you want to win customers, you have to make high quality images, which is a crucial part of the calibration. It is difficult to obtain high-quality outlets using an uncalibrated phototypesetting machine, but it is not difficult to calibrate the phototypesetting machine as long as there is the appropriate tool. In this way, if you want 20% outlets, the result should be 20% instead of 16% or 23%. In addition to the accurate level of replication, the correct calibration imagesetter can help you avoid the high part of the vast network and darkened part and paste. The output of a film made by a phototypesetting machine; the exposed part is black; the unexposed part is transparent and varies little. The word density is used to measure the extent of exposure to black. It is the result of a logarithmic operation. The greater the value, the greater the extent of the black. The maximum densitometer for some medium is Dmax. To measure the film opacity or black degree need to use special density meter. Density scoring is the two basic type of transmission density meter used to measure film density. A densitometer is used to measure the density of printed matter. Of course, there are also these two functions of densimeter. The densitometer shall be calibrated before each platoon is calibrated. The density of the output film mainly depends on the imagesetters exposure value settings, most imagesetter can control the intensity of the laser beam, the laser intensity is that the exposure value is greater, then the output image is black namely greater density. In order to get high quality output, must choose the appropriate exposure intensity, not only with the density of black text enough, and can accurately reflect the halftoning image. This process is not easy, because the phototypesetting machine can not directly display the continuous image, and can only be simulate