消防通道知识（Fire lane knowledge）.docVIP

消防通道知识（Fire lane knowledge） Fire passage requirements The curtain 2009-06-23 library 15:54 read 919 comment number: 0 greatly in small fire truck in length and width and height is a decisive factor affecting the fire lane capacity. The length of the general fire engine is greater than or near 10m, the height is near 4m, and the width is near 2.5m. Building regulations article 4.3.4 and article 6.0.2 of the high regulation provisions of the fire lane through building the height and width of not less than 4m, is in accordance with the various dimensions of fire vehicles for domestic use and determined. Taking into account the speed of fire engines generally faster, through the building, the width should ensure a certain safety factor, to facilitate rapid access to vehicles, arrived at the fire, and successfully put into battle. Fire lane settings should be comprehensive, the road load is too small, the road below the pipe is too shallow, and the ditch used light cover plate, etc., can not withstand the passage of large fire engines. In addition, as can be seen from the table, due to the large fire truck body length and minimum turning diameter is too large, therefore, enter the field set the fire lane for 12 * 12m was impassable, enter the field to set a larger area to meet the use requirements, it shall be determined according to the local actual equipped with large fire engines. 2. Setting up fire lane in built-up area Especially the old city area of built-up area often due to historical reasons, poor traffic conditions, fire water supply shortage in the inflammable built-up areas is also mixed with small factories, warehouses, and residential cross. The old city area of small towns, but also often is a bustling business district, is regarded as lots of gold, the residents shop sale, road occupied, temporary buildings, booth adjacent to a narrow channel, once the fire, easy to form huoshaolianying. The built-up area in general has the fire lane, the fire lane should