材料问答题（Material essay）.docVIP

材料问答题（Material essay） Simulation test (1) 1. Describe the experimental steps of soil moisture content drying method. Answer: (1) representative sample, fine grained soil 15 ~ 30g, sandy soil, organic soil 50g, sand gravel 1 ~ 2Kg into the weighing box, immediately cover the box cover, and the quality of the wet soil, to 0.01 g. (2) lift the lid, speak sample and weighing box into the oven, drying under the temperature 105 ~ 110 ℃ temperature. Drying time shall not be less than 8h for fine grained soil and shall not be less than 6h for sand. Mechanism to contain more than 5% of the earth, should be to control the temperature of 65 ~ 70 ℃ under the constant temperature drying, dry 12 ~ 15 h as well. (3) take out the sample and the weighing box after drying and put it in the dryer to cool (usually only 0.5 ~ 1h). After cooling, cover the lid, weigh the quality ms, accurate to 0.01 g. (4) calculation formula of moisture content: w = (m - ms) \ MSX 100 % Two parallel tests shall be carried out in this test, and the average value of two parallel tests shall be the water content, and the parallel difference shall be allowed to meet the requirements. 2. The sand sieve curve in grading range in the graph Ⅰ area, Ⅱ area, Ⅲ area shows what problem? What does the area outside the three zones explain? To make concrete, which area to choose? Why am I? A: engineering with sand is the sticky degree modulus in the sand of the range of 1.6 ~ 3.7, according to 0.63 ㎜ percentage over the accumulative total of mesh screen is divided into three gradation zone, if the gradation curve of concrete what completely in one of three zone area (details in 0.63 ㎜ mesh cumulative percentage screen), explain the grading conform to the requirements of the concrete with the grading of sand. If the grading of sand is exceeded in one (or several) sieve holes, it is indicated that the sand does not meet the grading requirements and shall not be used. Compound concrete priority select gradation meets the