2013年度建筑毕业设计精简版设计目录.docVIP

摘 要 用D值法和分层法计算。框架结构各榀桁架实际受力有空间整体作用，为空间受力，在手算过程中计算复杂，计算量大，因此在手算时忽略了空间整体作用，只对一榀框架进行受力分析与配筋计算。楼梯采用板式楼梯，分别计算梯段板、平台梁、平台板的内力与配筋。基础设计采用柱下交叉条形基础，减少结构的不均匀沉降，增强上部结构在纵横方向上的联系，具有较强的空间整体刚度。 ? 关键词：钢筋混凝土框架结构；荷载计算；内力计算；梁板柱截面设计；板式楼梯设计；条形交叉基础；  ABSTRACT ? s, the frameworks internal forces can be computed with D values method and stratification method respectively. The frame structure is under the power of spatial loads, and the computation is heavy and complex by hand, so we can neglect the action of the spatial force, and only make the force analysis and reinforcement. We use the plate staircase, and calculate the internal force and reinforcement of stairs, platform beams, and platform board. The basis design use the crossed bar foundation under the post，to reduce the differential settlement of the structure, enhance the links of the upper structure in the vertical and horizontal directions, and make a strong overall stiffness of the space. Keywords: reinforced concrete frame structure; load calculation; internal force calculation; cross-section design of beam and column; plate staircase design; crossed bar basis 目 录 第1章 设计资料··································································································1 第2章 结构布置与梁柱线刚度计算···································································2 2.1 结构平面布置························································································2 2．2 框架计算简图·······················································································2 第3章 荷载计算···································································································7 3.1 恒载标准值计算····················································································7 3．2 活荷载标准值计算··············································································10 3.3 竖向荷载作用下框架受荷总图··························································12 3.4 风荷载标准值计算··············································································18 3.5 水平地震作用计算···