工程造价(造价员培训学习资料)之2.4.3钢筋工程量计算（Construction cost (training materials for cost staff) 2.4.3 calculation of steel bar engineering）.doc

工程造价(造价员培训学习资料)之2.4.3钢筋工程量计算（Construction cost (training materials for cost staff) 2.4.3 calculation of steel bar engineering） This article is contributed by ashasjahaksdh The PPT document may not have a good browsing experience at the WAP end. It is recommended that you choose TXT, or download the source file to the native view. Calculation of reinforcement engineering 1. Calculation rules: (1) reinforcement engineering should be distinguished from the current casting, precast member, and different steel reinforcement engineering. And the specifications, by the length of the design times the unit weight, and the specification, by the length of the design times the unit weight, in tons. Calculation. (2) when calculating the amount of steel reinforcement, the design has stipulated that when the steel reinforcement is calculated, the amount of reinforcement works should be calculated To calculate the length of the lap length; To calculate the length of the lap length; Design of the provision of the lap length, including within the attrition rate of reinforcing steel bar, not the other meter length, including within the attrition rate of reinforcement, the lap length, steel bar electroslag pressure welding, the lap length, steel bar electroslag pressure welding, such as extrusion sleeve joint, with a calculation. Joint, for a calculation. (3) iron parts, bracket calculation) iron parts, Fixed embedded bolts, iron pieces, fixed double-layer steel, fixed embedded bolts, iron pieces, fixed double layers of iron madden, The iron parts shall be calculated according to the design rules of the approved construction organization, and shall be calculated according to the design rules of the approved construction organization, and set the corresponding project. The forehead. (4) the rebar calculation needs to be calculated according to the regulations to take losses Calculate the content Length of reinforcement bars, length of steel reinforcement bars, Weight of steel bar weight