北航《高层建筑结构》在线作业三（Beihang high-rise building structure online job 3）.doc

北航《高层建筑结构》在线作业三（Beihang high-rise building structure online job 3） Beihang high-rise building structure online job 3 Total score: 100 test time: -- test score: 100 One, single topic (total 15 questions, 60 points). Score: 60 1. In order to ensure the safety of buildings, appropriate anti-liquefaction measures should be selected according to the comprehensive consideration. The following options are not correct (). A. materials B. construction equipment C. site environment D. Foundation form Answer: D Score: 4 2. The tallest building in the world is () A. Sears tower in Chicago B. World trade center in New York The oil building in Kuala Lumpur D. the family insurance building in Chicago Answer: C Score: 4 3. The aseismatic targets of three levels and two stages can be summarized as () A. small earthquakes are not bad, and earthquakes can be repaired, but not too big. B. small shock, not bad, earthquake can be repaired C. small earthquakes can be repaired, not to be quakes, big shocks not bad D. small earthquakes are not bad, but earthquakes can be repaired. Answer: A, Score: 4 4. The application scope of the collaborative work analysis procedure is incorrect () A. Decompose A complete spatial structure into A series of plane structures. Therefore, the calculation is greatly simplified and some approximations are brought B. The collaborative work analysis program is applicable to the frame, frame shear and shear wall structure of the flat surface, and its anti-lateral force structure is arranged to be orthogonal or close to orthogonal C. With the work program used in oblique structure, the complete spatial tube will be divided into three sections of shear wall and three frames, which will also make a great deviation D. The structure of the original corner area should coordinate the joint forces of the two sides structure, and the force of the Angle zone is small Answer: D Score: 4 5. The following description of the wall frame is incorrect () A. The internal force dis