中级考试5（Intermediate test 5）.doc

中级考试5（Intermediate test 5） 1. Candidates answer 80 questions with a full score of 120, and the test time is 90 minutes. 2. The examinee should put the selected answers in the corresponding questions in the answer sheet, which will be invalid on the test paper. (1-60 questions, 1.5 points per item, 90 points in total. Each question has only one correct answer, and the wrong choice is not scored.) 1. The relationship between the profile and the sectional drawing is (). A. the section is the same as the section B C. The results are consistent with the results of the cutaway. The section is included in the sectional drawing The location axis is the main basis of construction. A. Positioning. Line B. Determine position c. plane size d. dimensions 3. A local or component in the drawing should be indexed by an index symbol, which is composed of the circle and the horizontal diameter of the diameter () mm. A. 8 b. 10 c. 12 d. 14 4. The external dimensions marked on the floor plan of the building are in mm, and generally the three dimensions are written. The first dimension is (). A. Size B. Internal dimensions C. Dimensions of locating axes d. overall dimensions 5. Read a set of construction drawings, usually first (), then (). A. Icon. Pattern b. drawings. Icon C. Details. Integral D. Design. Construction 6. Beam and column plan construction drawings are expressed in the layout of the flat surface. A. List B. C. Plane D 7. The wall with double layer reinforcement, in the reinforcement elevation drawing, the curved hook of the far face should be (). A. upward or right b. upward or left c. downward or right d. downward or left 8. The floor plan is a horizontal projection along the horizontal section of the building. A. Floor B. Floor C. Structural surface d. building surface 9. In the structure plan, there are often black squares or round blocks, representing (). A. Pipe well b. funnel c. reinforced concrete column d. reinforced concrete beam 10. Water flow in the water supp