电子狗说明（E-dog description）.docVIP

电子狗说明（E-dog description） / / /A780E24900000000002738D705597DF2#nolink Common problems and solutions Noil basic function (I) function description 1. Host startup display instructions 1. Start the startup program The screen test will be displayed first when the power is switched on. All the subtitles will be fully lit, including the electronic compass/radar frequency/distance speed display. 1-2 will broadcast the welcome words [welcome to use the conqueror global satellite radar system, please fasten your seat belt] The 1-3 coordinate version shows the current GPS version XXXX. 1-4 local time display, current time XX: XX 1-5 driving mode display, preset value is [safe driving speed limit mode] 1-6 radar signal detection setting hint, at present radar signal setting [high], preset value is high 2. Satellite launch status 2-1. When the satellite connection is successful, it will be broadcast. 2-2 when the machine is in a state of satellite links, the time of the : will continue to flashing, whereas when not connected to the satellite, in time: will not last, in the state, can not connect with satellite electronic compass north, south, east and west will continue to take turns flashing, when connected to the satellites, electronic compass will display according to the direction of car travel and azimuth. 2-3 display in the C and U (see chart 2) represents the current users driving mode, when according to C, on behalf of the speed limit for the camera system model, when the shows at the same time as U C, on behalf of the current system model for photography, when only show U, representative for safe driving mode at present, when C with U dont show, on behalf of the current model for safe driving the speed limit. 2. Host function query 1. System information query and download mode If you need to press [MODE] for a second, you can enter the system information circular query. If you need to repeat the report, you can press [MEMO] for a second 1-1 latitude altitude inquires,