自行车翻新（Bicycle retreading）.docVIP

自行车翻新（Bicycle retreading） Bicycle retreading technology Decontamination polishing agent. Recipe: three sodium acetate 0.227 kg, 6.8 liters of mineral oil (oil), oleic acid 0.556 liters, grinding agent (silicon clay) 0.5 kg, 22.7 litres of water. This formula does not contain wax. It can be used for cleaning and polishing, such as automobiles, bicycles and so on. Preparation and usage: dissolve three sodium acetate in water, mineral oil and oleic acid, mixed with container, then add three sodium acetate solution, stir, add grinding agent, continue to stir thoroughly. With a dip in the polishing agent is coated on the surface of clean, dry cloth wipe clean after another, is bright as new. Two, plating parts rust brightener. Recipe: ammonium acetate (ammonium acetate) 65 grams, fully dissolved in a small amount of water, add water to 100 ml is. Usage: when using, heat the solution through the water (hot water pot) to about 80 DEG C, wipe it with soft cloth and wipe the plating parts repeatedly, then rust and polish. Small pieces can be dipped directly into the solution for 10 seconds, then remove and dry. Three, frame, fender retreading agent. Recipe: 250 grams of black paint, 25 grams of glass glue, mixed evenly into. Usage: scraping frame, fender paint, emery cloth hit the net with a soft brush to be coated with liquid. This liquid has strong adhesion and high temperature resistance. Bicycle renovation, we can refer to it Bicycle fast technical renovation of 1 metal paint recipe: 40 grams of benzene; xylene fusel oil 10 grams, 30 grams, 15 grams of ethanol. Usage: the organic solvent by mixing, the bicycle frame, fork, etc. in the removal of paint for bicycle brake agent in about 1 hours, you can remove the old paint layer, and then rinse with water 2 to 3 times, the old paint layer can be removed, then the ink paint 250 grams and 30 grams of mixed glass glue even with a soft wool brush the paint evenly to the surface of the object, which is bright and the fluid of h