汽车知识 车主必备（Car knowledge car owner must）.docVIP

汽车知识 车主必备（Car knowledge car owner must） LPG fuel cars Time: 2010-5-20 browsing: 59 The main components of Liquefied Petroleum Gas (LPG) are proc (G3H8) and butane (G4H10). Under normal temperature, the LPG is a gaseous state and can be turned into a liquid with only a little pressure or cooling. Due to the 12 ℃ has higher octane number, therefore is an ideal vehicle fuel. The dual-fuel vehicle is to retain the fuel system of the original vehicle and install an LPG supply system, which can be freely converted between gasoline and LPG during the use of the vehicle. When the car is burning with LPG, the driver can change the operating conditions of the engine to suit the performance of the car, just as the driver can control the gas pedal. 1. Composition and working principle of LPG system 1.1 main composition and working principle of LPG system The system consists of gas storage tank, evaporative voltage regulator, gasoline solenoid valve, LPG solenoid valve, power regulating valve, VRV mixer, fuel conversion switch, control circuit, etc., as shown in figure 1. When the fuel conversion switch is allocated to LPG position, the gasoline solenoid valve is off (cutting off the gasoline supply), and the LPG solenoid valve is energized. The LPG liquid comes out from the gas storage tank and passes through the LPG solenoid valve to the evaporator, which is reduced to a gas that is approaching atmospheric pressure. LPG gas flowing through the power regulator to the venturi mixer, mix with air in the venturi mixer, according to the operation condition of the engine to the carburetor throat channel role (only) to supply a certain amount of LPG gas. 1.2 propane tanks The storage tank is installed in the baggage compartment of the rear of the car, which is used to store LPG, which is installed with the integrated valve to ensure the safe use of the gas tank and the whole system. The structure of the integrated valve is shown in figure 2. The functions of the integrated valve are