第三章 优质建筑工程质量评价（The third chapter is the quality evaluation of high quality building engineering）.doc

第三章 优质建筑工程质量评价（The third chapter is the quality evaluation of high quality building engineering） 1, understand the quality standard, sub division, unit project. P62 2, high quality structural engineering quality evaluation of the project rejected. P72 3, the perception of the quality acceptance record method.P112 4, the quality of construction unit conditions. P112 A single choice 1, Jiangsu Province, the quality of construction engineering quality evaluation criteria for Jiangsu province (D) quality evaluation. A, B, high quality structural engineering project C, D, A and quality of installation engineering B 2, awarded project, sub project including inspection group (B)% and above should reach the standard of quality inspection requirements. A, 50 B, 60 C, 80 D, 90 3, unit (sub unit) project evaluation for quality engineering, comprehensive evaluation should be greater than or equal to (C) branch. A, 80 B, 85 C, 90 D, 95 Concrete structure 4, underground waterproof engineering no obvious cracks, the crack width is less than 0.20mm, and no water seepage. According to the construction area of the basement (A m2) were calculated for each fracture number is not greater than 1, to meet the requirements of concrete durability and impermeability. A, 500 B, 600 C, 800 D, 1000 5, awarded the high quality structural engineering, the thickness of reinforced concrete protective structure (D) reinforced protective layer thickness should be in the range of allowable deviation. A, 80% B, 85% C, 90% D, all 6, the declaration by the high quality structural engineering (D) report to the local engineering quality supervision institutions before construction. A B C, the construction units design units, construction units, supervision units D 7, concrete slab thickness measurement qualified rate is greater than (C)% can be rated as high-quality engineering quality. A, 80% B, 85% C, 90% D, 95 8, rated as high-quality engineering units, the roof waterproof engineering quality must be n