钢结构试题（Steel structure examination questions）.doc

钢结构试题（Steel structure examination questions） The following 1. components which exceed the limit state of bearing capacity () A. component deformation under load and effect The B. component to generate larger vibration under dynamic loads The C. component due to plastic deformation and excessive cloth is not suitable for carrying D. components appear to affect the local damage of durability Contains 2. carbon construction steel, with the increase of carbon content, the expression is not correct (C). A. increases the strength of steel B. steel weldability is good C. steel plasticity and toughness decrease D. cold bending properties decrease The following 3. elements, make the steel cold crisp is (D) A. B. C. D. carbon manganese sulfur phosphorus The 4. bolt connection calculation of bolt shear surface (number). A.2 B.3 C.4 D.5 5. constant amplitude fatigue strength calculation, calculation of stress amplitude for non welded structure () A. B. C. D. 43 said 6. electrode in E4311 (code) A. weld metal yield strength of 43kgf/mm2 B. weld metal tensile strength 43kgf/mm2 C. deposited metal shear strength 43kgf/mm2 D. weld metal yield strength of 43N/mm2 7. beam overall instability in the form of (C). A. B. torsional flexural buckling instability C. lateral torsional instability depends on the load distribution of D. 8. axial compression type solid column, the web with longitudinal stiffeners is (D). A. improve the strength of the bearing capacity of B. to improve the stiffness C. improve the overall stability of D. to improve the local stability of Web 9. check the stiffness of the beam is calculated by the deflection, load (A). A. permanent load and variable load standard value of B. permanent load and variable load design value C. permanent load standard permanent load D. value 10. check the lattice column of a virtual axis instability by reason of slenderness ratio conversion is considered (C). Effect of B. A. bending torsion effect Influence of shear deformation of D.