电点资料（Point data）.doc

电点资料（Point data） 1. equipment inspection work Five and its content is what? (5) answer: (1) - fixed position, check the setting items and contents; (2) Law -- Check the inspection method, is the five sense, tools, or instruments; (3) calibration - maintenance standards; (4) - check the setting of the regular cycle; (5) people- The inspection project implemented by who. What are the basis for the preparation of 2. maintenance technical standards (5 points)? Answer: (1) technical drawings and instructions provided by the manufacturer; (2) the maintenance technical management of domestic and foreign similar equipment or the nature of the use of similar equipment value; (3) experience. The 3. dimension declaration of spare parts plan needs to consider. (5 points) Answer: consumption quota (cycle), machine spare parts quantity, quantity, quantity of spare parts, spare parts warehouse transit contract manufacturing cycle (orders), operation cost, Through the audit did not sign a contract plan number, equipment status, maintenance plan. 4. what is the maintenance model? Maintenance model is set up to consider what factors? (10) Answer: starting from between the various stages of production relations is not interrupted, to ensure that enterprises in the production logistics and the supply of energy, balance and coordination The premise of maintenance load fluctuations in various maintenance personnel every day dont too much, for each of the main production line equipment maintenance cycle, maintenance time, operation group And repair and maintenance of the five elements of the load date comprehensive balance of scientific advance, set the standard maintenance modules, called maintenance or repair model Engineering model. Maintenance model is set up to consider the following main factors: A. to consider the process of contact, ensure the production line smooth logistics, minimizing the loss of energy medium. B. repair cycle, time setting to match The actual situation with th