横切压痕之故障分析（Fault analysis of transverse indentation）.docVIP

横切压痕之故障分析（Fault analysis of transverse indentation） [article] fault analysis of transverse indentation is recommended Indentation is an important process of finishing, it is widely used, cartons, paper bags and other packaging printing products, can be used indentation process. It can be said that the quality of the die cutting indentation, directly affect the products performance and market image. So, the correct understanding is easy to appear the indentation in the production process of some quality fault, relative technique measures, scientifically and reasonably well die-cutting production and quality control, to effectively prevent various quality faults and improve the production efficiency, has very important significance. A fault analysis of some semi-finished products, die-cutting indentation position or the specifications are not allowed 1. semi-finished expansion cause Suites specifications are not allowed. If the paper semi-finished paper poor stability, so that in the process of printing water content appeared obvious variation, especially after calendering, coated or pasted process, due to heat or moisture absorption, the semi-finished product appeared expansion changes, so cutting indentation, the layout position will print the deviation of the situation. In this regard, the solution is: try not to use just the production of paper, just produce paper should be placed in a few months, the relative balance of the printing conditions after put into use, so it is relatively small deformation. For high precision products, should fully consider the deformation coefficient of calendering, coating, laminating technology, printing in make-up as appropriate to adjust the layout position. In addition, to control the temperature and humidity paper library, glazing, calendering, coating, laminating and die-cutting workshop, the temperature and humidity in the production process, no obvious disparity between high and low, to ensure the position of cutting indentat