二注例题（Two note examples）.doc

二注例题（Two note examples） Abstract: in the eight phase of the expansion project of Baoding thermal power plant in 5# coal Zhanqiao as an example, to explore the calculation of steel truss deck calculation part of Zhanqiao. Keywords: construction capacity, flexural capacity, shear capacity, deflection The large industrial power plants and other transportation of Zhanqiao, and now the use of large span steel truss structure, the design of the first thing to do is bridge, roof and part of the statistical load bearing capacity calculation, meet the overall structure requirements after the seismic checking calculation and Zhanqiao. The following mainly expounds the steps and calculation of bridge deck and roof part. Baoding thermal power plant expansion project eight 5# to Zhanqiao, and the horizontal angle of 10.4 degrees, the reinforced concrete bridge deck board, and with a lower pressure plate, H steel, steel beam spacing is 3m. Bridge deck, beam A pressure plate 1, profiled steel deck concrete slab construction stage as the template, the bridge deck model for non combination plate, checking the pressure plate in the construction phase of the strength and stiffness. Using the YX70-200-600 model (Galvanized), plate thickness is 1.2mm. The mechanical properties: Material: Q 235 (tensile, compression and bending strength design value f=205N/mm2, the shear strength design value of fv=120N/mm2) Weight: 16.2kg/m (0.16kN/m) Moment of inertia: I = 115 * 104mm4 Bending moment: W = 30.6 * 103mm3 Elastic modulus: E = 2.06 * 105N/mm2 Pressure plate details see figure 3. 2, load: The upper concrete plate thickness is 80mm (average 105mm). The construction stage of constant load: concrete weight: 25 x 0.105 x 1m width = 2.625kN/m Pressure plate weight: 0.162kN/m2 The construction phase: live load is calculated by the 1.5kN/m2 Is the basic load combination value: 1.2 x (0.162+2.625) /COS (10.4) +1.4 * 1.5 = 5.533kN/m (horizontal projection direction) The combination of standard load