大型深基础施工方案和施工组织（Construction plan and construction organization of large deep foundation）.docVIP

大型深基础施工方案和施工组织（Construction plan and construction organization of large deep foundation） Scheme of deep foundation construction organization design of a special school A compilation basis: 1, design and construction drawings. 2, the geological survey report 3, foundation and foundation acceptance specification JGJ120-99 support for 4, building foundation pit 5, construction safety inspection standards JGJ59-99 Two project overview A new school campus is located in Jiangxi city of Xinyu Province Economic Development Zone on the north side of a highway, South Campus, South East of Dongxing Skyway Avenue, North Road, north of an expressway, this project is a new school campus stands. Xinyu city is located in the Dongxing high tech Development Zone north of the west, the project by the Design Institute of design of a building. The total construction area of 2782 square meters respectively, the first layer is 3.6m, the total length is 136.5m, width of 13.95m, the project for the frame structure. Three, construction preparation 1, the engineering survey according to the owners to provide coordinates and elevation control points, combined with the general layout and construction layout drawing, establishment of plane control network and elevation control network in the engineering detection. 2, the scene of the plane control surveying using closed precision theodolite, the elevation control level, according to the tentative, precise and complex test procedures, to ensure that the axis coordinates and elevation points coincide. 3, all the instruments and the ruler must be in use before the measurement and identification, inspection qualified rear can use. 4, according to the design and construction requirements, construction area of three connections and one leveling work. Based on using mechanical excavation, all earthwork sinotrans. 5, do the measurement line work. The range is not influenced by the foundation, set the measurement control network. Including the axis and l