烟囱方案英文.docxVIP

Stack Project Construction Plan1、construction technologyAccording to stack character of stack , outer shell shall use tripod over form construction+ construction hoist+ supporting bridge construction technology to do erection and internal tube steel platform and erection shall apply air jack inversion construction technology.2 construction processConstruction surveying→earthwork excavation→foundation construction→earthwork backfilling→ stack outer shell over-form construction(hoisting machine, steel barrel plate fabrication）→bearing beam and construction basket installation and test（construction hoist+ supporting bridge system dismantling）→steel platform and ladder erection→steel internal barrel air jack construction →miscellaneous project construction.3foundation project construction1）cushion constructionpour the plain concrete cushion after trench excavation finished and place cushion line according to stack center. Concrete tanker is used for concrete transportation and flat vibrorammer for tamping and aluminum frame material for press polish. Cushion elevation shall use rebar pile to control and straw bag covering watering method for maintenance.2）foundation rebar constructionFoundation bseplate and wall rebar should be binded in one time and side apace bar set every 3m and steel pipe and steel split heads are to be added every 2m to avoid collapse due to heavy foundation frame rebar. Do joint inspection before concrete pouring for its qualification.Foundation rebar circle shall 10d single side welding or 30dfor connection and vertical diameter larger than 16mm, rolling thread or 35d for connection.3）foundation formworkFoundation formwork shall use set-shaped steel formwork（P3015）assembly with outer harden supporting for consolidation and internal split bolt to fix formwork by M14split bolt with a horizontal distance of 500mm and vertical distance of 850mm. sealing tapes shall be used for mortar leakage within formwork.4）foundation concrete Concrete pouring：the