Design of Beams (Flexural Members) (Part 5 of （梁的设计(弯曲成员)的第5部分）.pdf

53:134 Structural Design II Design of Beams (Flexural Members) (Part 5 of AISC/LRFD) References 1. Part 5 of the AISC LRFD Manual 2. Chapter F and Appendix F of the AISC LRFD Specifications (Part 16 of LRFD Manual) 3. Chapter F and Appendix F of the Commentary of the AISC LRFD Specifications (Part 16 of LRFD Manual) Basic Theory If the axial load effects are negligible, it is a beam; otherwise it is a beam-column. J.S Arora/Q. Wang 1 BeamDesign.doc 53:134 Structural Design II Shapes that are built up from plate elements are usually called plate h girders ; the difference is the height-thickness ratio of the web. t w ⎧h E 5.70 ⎪beam≤ t F ⎪ w y ⎨ ⎪h E 5.70 plate girder⎪ t F ⎩ w y Bending M = bending moment at the cross section under consideration y = perpendicular distance from the neutral plane to the point of interest I x = moment of inertia with respect to the neutral axis Sx = elastic section modulus of the cross section For elastic analysis, from the elementary mechanics of materials, the bending stress at any point can be found