Design, Synthesis And Simulation Of Four Bar （的设计、合成及模拟四栏）.pdf

Retheesh Kumar, Prof.Akash Mohanty / International Journal of Engineering Research and Applications (IJERA) ISSN: 2248-9622 Vol. 3, Issue 3, May-Jun 2013, pp.953-956 Design, Synthesis And Simulation Of Four Bar Mechanism For Eliminate The Plowing Depth Fluctuations In Tractors Retheesh Kumar*, Prof.Akash Mohanty** *(Department of Mechanical Engineering, VIT University, Vellore, India- 632014) **(Department of Mechanical Engineering, VIT University, Vellore, India- 632014) Abstract In this paper, a four bar mechanism mechanism, that is to be coupled to the device, was designed for the specified performance ought to have an honest lifetime while not output for a tractor. In tractor’s plowing is undergoing any wear and tear, corrosion etc. engaged with the assistance of a hydraulic whereas comparison to gear and timing belt and cylinder. Looking on the soil hardness the pulley mechanism the angular sensor can provide plowing depth fluctuates that isnt fascinating. additional accuracy because it is coupled to linkage To induce the correct plowing depth an mechanism. Backlash error is that the main Electrical control system is introduced. It complications of mechanisms like spur and bevel consists of hydraulic valve, control unit and also gears. Most allowable error of angular sensor is the angular sensor. The control system helps to 1%. Slippage error is that the major hin