Drill Pocket Contour University of Idaho（钻口袋轮廓爱达荷大学）.pdfVIP

HAAS Mill Tutorial Drill –Pocket – Contour (Print this tutorial out and follow step-by-step) 1) Follow this link here, select the MasterCAM – X5 Tutorial PDF or .Doc file. Download and save the SolidWorks file linked with the tutorial. /mindworks/machine_shop.htm 2) Open the file in SolidWorks and select to save it as an IGES file. Then click on the options tab. 3) In the Options menu select IGES 5.3 and make sure that the IGES wireframe (3D curves) is enabled.