Global Marketing for Tube Pipe （全球营销管和管道）.pdf

Global Marketing for Tube Pipe www.TubeS JIS G4051 Carbon steel for Machine Structural Use 1. Scope This Japanese Industrial Standard specifies the carbon steels for machine structural use manufactured by hot forming, such as hot rolling or hot forging, ordinarily to be used after further process of forging, cutting and heat treatment, hereinafter referred to as the steel JIS G 3201 and Jis G 3251 are excluded from the above. 2. Classification and Symbols The steel shall be classified into 23 classes and the respective symbols shall be as given in Table 1. The 3 classes of S09CK, S15CK and S20CK, however, are used for case-hardening purposes. 3. Method of Manufacture 3.1 The steel shall be manufactured from killed steel ingot. 3.2 The steel shall be rolled or forged from steel ingot with forging ratio of not less than 4 S. When the forging ratio of the billet for forging or rolling is less than 4S, a prior agreement between the purchaser and the manufacturer shall be made. 3.3 Unless otherwise specified, the steel shall be as rolled or forged. 4.Chemical Composition The chemical composition of the steel shall be determined by the ladle analysis and the value shall be as given in Table1. Table 1. Symbol of Class and Chemical Composition Chemical composition % Symbol of class C Si Mn P S S10C 0.08 to 0.13 0.15 to 0.35 0.30 to 0.60 0.030 max.