Harry’s Tool Box Judy Kitson（哈利的工具箱朱迪凯特森）.pdf

Harry’s Tool Box pair is complete. If a significant portion of the original threads are miss- By Bob Sybrandy ing after the repair or you cannot torque the nut to specifi- cation, you will have to replace the stud. The torque specifications are: front wheel nuts 65-75 foot pounds and REPAIRING DAMAGED WHEEL STUDS rear wheel nuts 80-90 foot pounds. We’ve all seen them, restored tractors and working Thread Repair File tractors with missing lug nuts and stubs of broken wheel Threads can also be repaired with a special thread studs. Sometimes we see studs of different lengths or lug repair file that has rows of teeth in various widths and nuts of different sizes, the result of incorrect replacement pitches. The spacing between the rows corresponds to parts. the number of threads per inch used on different size When wheels, particularly those with ballast filled tires, bolts with either fine or coarse threads. Typically these are removed or installed, they are often dragged over the files have eight different thread dimensions, four at each studs, crushing the threads so the lug nuts will not thread end. After determining the correct thread spacing and easily onto the wheel studs. pitch on the bolt or stud you are restoring, the file is drawn across the damaged area to restore the thread