MRE MF E Dorma（绝笔MF E 德国）.pdfVIP

EMF/EMR — Holder/Release Devices with Integral Door Closers EMR TECHNICAL DETAILS DORMA EMR SERIES—HOLDER/RELEASE DEVICE — The DORMA EMR Series holder/ holder/release device holds a door other installed hardware. This electromagnet), 310 mA (2 release device incorporates a open under normal conditions. design enables initial hold electromagnets). 120 VAC photoelectric detector and can However, if an alarm state or loss while allowing the door to be requires optional transformer control the spread of smoke and of electric current occurs, it manually opened beyond the (TRANSF). See accessories, back fire in a specific location or permits the closing of the door hold open point. page. (The EMR detector is throughout the building if wired from any angle of opening. . Detector can control one EMF capable of powering and into a central alarm panel. These units are particularly suited unit for pairs of doors. controlling a non-detectored EMF for use in hotels, hospitals, . Interfaces with new or existing unit; the two solenoid value above The EMR Series is designed to nursing homes, schools, and smoke or fire control systems. represents an EMR/EMF monitor and contain the spread of senior facilities because they . Can be wired for concealed or combination). fire and smoke while allowing allow easy accessibility on a day- surface wiring. unimpeded, easy access to-day basis, while quickly . HO can be released manually. Detector throughout a building. The